Wholesale Waterproof Floating Hunting Bags for Retailers and Distributors

The SL-E603 single-strap waterproof gun slip measures 122 × 30 × 8 cm at approximately 1.1 kg and carries approximately 5.1 kg loaded through two welded reinforcement patches. The 840D TPU laminated shell is RF welded as a one-piece body, closed by a sealed zipper welded into the body seam and rated IPX7. Strap width is specified between 38 mm and 75 mm, with anchor spacing and placement set at sampling. MOQ 300 pcs, samples in 7–10 days.

The SL-E603 slim waterproof gun case measures 122 × 30 × 8 cm at approximately 1.1 kg, with an internal capacity of approximately 25–30 L. At 8 cm loaded thickness it fits vehicle rack slots, gun room shelving and behind-seat spaces. The 840D TPU laminated shell is RF welded as a one-piece body, closed by a sealed zipper welded into the body seam and rated IPX7, with one low-profile welded waterproof pocket. MOQ 300 pcs, samples in 7–10 days, production in 30–45 days.

The SL-E603 form-fitting waterproof rifle slip measures 122 × 30 × 8 cm at approximately 1.1 kg, with internal chamber width and depth dimensioned per section against a customer reference firearm rather than to a single figure. The 840D TPU laminated shell is RF welded as a one-piece body, closed by a sealed zipper welded into the body seam and rated IPX7. The interior is a smooth welded face with no seam ridges or exposed stitching. MOQ 300 pcs, samples in 7–10 days.

The SL-E603 contoured waterproof gun case measures 122 × 30 × 8 cm with an internal capacity of approximately 25–30 L at approximately 1.1 kg. The 840D TPU laminated shell is RF welded with a rounded buttstock chamber and a tapered barrel chamber formed on dedicated electrode tooling, closed by a sealed zipper welded into the body seam and rated IPX7. Chamber radius, taper angle and depth are set against a customer reference firearm. MOQ 300 pcs, samples in 7–10 days.

The SL-E603 fully waterproof gun slip measures 122 × 30 × 8 cm at approximately 1.1 kg, rated IPX7 under IEC 60529 — immersion in one metre of water for thirty minutes. The 840D TPU laminated shell is RF welded as a one-piece body, the closure is a sealed zipper welded into the body seam, the accessory pocket is welded to the shell face and the strap anchors are welded reinforcement patches. No stitching appears anywhere in the waterproof body. MOQ 300 pcs, samples in 7–10 days.

The SL-E603 HF-Welded Gun Case measures 122 × 30 × 8 cm at approximately 1.1 kg with an internal capacity of approximately 25–30 L. The 840D TPU laminated shell is formed on dedicated electrode tooling at 27.12 MHz as a one-piece body with a rounded buttstock chamber and a tapered barrel chamber, closed by a sealed zipper welded into the body seam and rated IPX7. Welding runs in-house at Dongguan, China and Ho Chi Minh City, Vietnam. MOQ 300 pcs, samples in 7–10 days.