Soft Gun Cases are stitched, foam-padded firearm cases for everyday transport of rifles and shotguns. Sealock's current models are the SL-E899 tapered padded case (122 × 26 cm, approx. 0.85 kg, 10–15 mm foam), the SL-P1076 padded rifle case with a 40 mm removable quilted gun pad (134 × 23/11 × 6 cm, 1.5 kg) and the SL-E602 slimline tapered gun slip. Outer fabric is 600D polyester Oxford with a water-resistant coating on all three.
Soft gun cases are sewn and assembled at Sealock's facilities in Dongguan, China and Ho Chi Minh City, Vietnam, under ISO 9001 quality management. MOQ is 300 pcs per model, samples take 7–10 days and production takes 30–45 days.
A soft gun case is built in three layers: a woven outer fabric, a foam cushioning layer and a soft lining that contacts the firearm. It protects against scratches, knocks, dust and rain during handling and weighs 0.85–1.5 kg across the Sealock range, compared with 4–5 kg for a rigid case of similar length.
| Layer | SL-E899 | SL-P1076 |
| Outer | 600D polyester Oxford, water-resistant finish | 600D polyester Oxford, PU water-resistant coating |
| Padding | Foam, 10–15 mm, built into the wall | Multi-layer foam pad, 40 mm, removable |
| Lining | Soft polyester | Soft polyester, diamond quilted |
| Closure | Full-length coil zipper | Full-length waterproof zipper, lockable pulls |
| 1 zippered front pocket | — |
| Model | External length | Recommended max. firearm length |
| SL-E899 | 122 cm | approx. 46 in overall |
| SL-P1076 | 134 cm | approx. 50–51 in overall |
Recommended firearm length is measured with sling and recoil pad fitted. Zipper edging and end padding reduce usable length below the external figure.
SL-E899 foam is laminated between the outer and lining at 10–15 mm, available in thicker specifications for premium tiers. SL-P1076 uses a separate 40 mm pad that lifts out for drying after wet trips, can be replaced when compressed, and can be ordered as a spare part line. In a 6 cm case, the pad accounts for about two thirds of the internal depth.
SL-P1076 measures 23 cm high at the stock end and 11 cm at the barrel end. SL-E899 is cut wider at the buttstock and narrower at the muzzle to the same principle. A tapered cut reduces the internal volume around the barrel, which limits movement of the firearm in transport. Profiles are adjusted against a reference firearm at sampling.
| Model | Handle | Shoulder strap | Zipper |
| SL-E899 | Reinforced webbing | Adjustable, removable | Full-length coil |
| SL-P1076 | Twin braided rope | Adjustable, detachable | Full-length waterproof, lockable pulls |
Coated 600D Oxford sheds rain and spray during normal carry. The stitched construction has needle holes along every seam, so soft gun cases are water-resistant and carry no IPX immersion rating. For boats, river crossings and flooded blinds, welded IPX7 cases are listed under Floating Shotgun Cases; for marsh use with padding and MOLLE, see Swamp Hunting Bags.
SL-E899 is supplied in sand, army green, camouflage and black. SL-P1076 is supplied in reed and marsh camouflage with tan reinforcement panels. Custom options: length, padding thickness, lining material and colour, strap width and hardware, zipper pull size, pocket configuration, Pantone colour matching, customer camouflage patterns, and retail packaging. Soft gun cases sit within the wider Rifles and Tactical Gear range.
300 pcs per model, quoted EXW, FOB or CIF.
Per model against length, padding thickness, fabric, hardware, branding and order quantity.
Yes, by screen print, heat transfer, embroidery or woven label.
Dry and unzipped, with the firearm cleaned and dried before casing.
