Rifles and Tactical Gear covers Sealock's carry and protection products for long guns and the accessories used with them, in five sub-categories: rifle bags, tactical rifle backpacks, soft gun cases, tactical ammo pouches and tactical utility pouches. Current models include the SL-E899 padded soft case (122 × 26 cm, approx. 0.85 kg), the SL-P1076 padded rifle case with a 40 mm removable gun pad (134 × 23/11 × 6 cm, 1.5 kg) and the SL-C811 tactical waterproof rifle case with laser-cut MOLLE and backpack carry (132 × 33 × 10 cm, approx. 2.6 kg).
All models are produced at Sealock's own facilities in Dongguan, China and Ho Chi Minh City, Vietnam. Sealock has manufactured outdoor carry products since 2003 and holds ISO 9001, BSCI and SMETA certification. MOQ is 300 pcs per model, samples take 7–10 days and production takes 30–45 days.
| Sub-category | Construction | Typical Use |
| Soft Gun Cases | Stitched 600D Oxford, foam padded, full-length zipper | Transport between cabinet, vehicle, field and range |
| Rifle Bags | Soft or semi-structured, single or double long gun | Storage and short-distance transport |
| Tactical Rifle Backpacks | Padded case with backpack harness and MOLLE | Carry over distance with accessories mounted outside |
| Tactical Ammo Pouches | MOLLE-mounted pouches | Magazine and ammunition carry on a case, belt or pack |
| Tactical Utility Pouches | MOLLE-mounted pouches | Tools, optic accessories and cleaning kit |
Case internal length is specified against the firearm's overall length with optic, sling, suppressor and bipod fitted. A receiver and stock add roughly 38 cm to a quoted barrel length, so a 30 in shotgun barrel gives an overall length of about 114 cm.
| Firearm configuration | Approx. overall length | Matching Sealock model |
| Shotgun, 26–28 in barrel | 104–109 cm | SL-E899, 122 cm body |
| Shotgun, 30 in barrel | 114 cm | SL-E899, 122 cm body |
| Scoped hunting rifle | up to approx. 127–130 cm | SL-P1076, 134 cm body |
| Precision rifle with suppressor | 115–120 cm | SL-C811, 132 cm body |
SL-C811 is also quoted at 122 cm and 140 cm body lengths. Fit for large-objective optics and extended magazine tubes is confirmed against a customer reference firearm at sampling.
| Model | Construction | Weather rating |
| SL-E899 | Stitched 600D Oxford, coil zipper | Water-resistant (rain and spray) |
| SL-P1076 | Stitched 600D Oxford, waterproof zipper | Water-resistant, no IPX rating |
| SL-C811 | RF welded 840D TPU, waterproof zipper | IPX6 (powerful water jets, not immersion) |
Stitched cases shed rain and spray during normal carry. Welded construction removes needle holes from the shell. For use in standing water or by boat, immersion-rated IPX7 cases are listed under Waterproof Floating Hunting Bags.
SL-E899 uses 10–15 mm foam built into the case wall. SL-P1076 uses a 40 mm removable quilted pad that can be dried or replaced separately. SL-C811 grades EVA foam by position — 20–25 mm egg-crate in the lid, 15 mm in the base, 10 mm at the sides — and adds six to eight adjustable retention straps that hold the fore-end, receiver and stock in place during transport.
Stitched MOLLE webbing places a needle hole at every bar-tack on the panel. On SL-C811 the MOLLE grid is laser-cut into a welded outer panel with sealed slot edges, which keeps the shell continuous behind it. The grid accepts PALS-compatible Tactical Ammo Pouches and utility pouches.
| Model | Carry options |
| SL-E899 | Adjustable removable shoulder strap, reinforced handle |
| SL-P1076 | Twin braided rope handles, adjustable detachable shoulder strap |
| SL-C811 | Adjustable backpack straps, detachable shoulder strap, reinforced handle, two D-rings |
A padded gun case such as SL-E899 or SL-P1076 absorbs knocks through its foam layer and weighs 0.85–1.5 kg. A tactical rifle case such as SL-C811 adds a welded waterproof shell, internal retention straps, exterior MOLLE and a backpack harness, and weighs approximately 2.6 kg. Buyers building a two-tier range commonly pair a padded model from Soft Gun Cases with the tactical model.
Case length, padding thickness and grade, retention strap count and position, MOLLE panel size and slot pattern, strap width and hardware, exterior colour and camouflage pattern, branding by screen print, heat transfer, embroidery or welded patch, and retail packaging. Development can start from an existing model or from a customer drawing and reference firearm.
300 pcs per model, with samples in 7–10 days and production in 30–45 days, quoted EXW, FOB or CIF.
Per model against the specified length, padding, hardware, branding and order quantity. Send the target specification and quantity for a project quotation.
Yes. Screen print and heat transfer on stitched cases; welded logo patch or print on welded cases, applied without piercing the shell.
