Products

Sealock is the manufacturer and supplier of high-quality Water-Resistant Padded Rifle Case.The SL-P1076 measures 134 × 23/11 × 6 cm at 1.5 kg, taking firearms up to approximately 127–130 cm (50–51 in) overall. It carries a 40 mm removable multi-layer foam gun pad inside a quilted polyester lining, with a 600D polyester Oxford outer carrying a water-resistant coating. Closure is a full-length heavy-duty waterproof zipper with lockable pulls. Twin braided rope handles, adjustable detachable shoulder strap, reinforced stock, centre and barrel panels. Reed camouflage. MOQ 300 pcs.

Sealock is a manufacturer and supplier of Roll-Top Gun Slips.The SL-P857 roll-top waterproof gun slip measures 155 cm unrolled and 137 cm sealed, taking firearms up to approximately 125–128 cm (49–50 in) overall. Height is 26 cm at the butt and 10 cm at the muzzle, width 2 cm, weight approximately 0.95 kg. The 840D TPU laminated shell is RF welded as a one-piece body with a three-fold roll-top closure and side-release buckle, rated IPX7, plus one welded waterproof zippered pocket and a detachable padded strap on welded D-ring anchors. Black. MOQ 300 pcs.

Sealock is a manufacturer and supplier of professional Tactical Waterproof Rifle Cases in China.The SL-C811 measures 132 × 33 × 10 cm with a capacity of approximately 42 L at approximately 2.6 kg. The 840D TPU laminated shell is RF welded and rated IPX6, closed by a full-length two-way waterproof zipper. Interior: EVA foam at 20–25 mm in the lid, 15 mm base and 10 mm sides, with six to eight adjustable retention straps. Exterior: laser-cut MOLLE, two D-rings and a hook-and-loop panel. Backpack straps, detachable shoulder strap and reinforced handle. Grey, brown, camouflage. MOQ 300 pcs.

Sealock Marsh Wetland Waterproof Gun Case measures 122 × 30 × 8 cm at approximately 1.1 kg, rated IPX7. The 840D TPU laminated shell is RF welded as a one-piece body with a radiused buttstock chamber that drains when inverted, and a sealed zipper welded into the body seam. The welded shell tolerates hosing and scrubbing. A multilingual care card covering the closure rinse routine is supplied for wetland programmes. MOQ 300 pcs, samples in 7–10 days.

Sealock Cold-Weather Hunting Gun Case measures 122 × 30 × 8 cm at approximately 1.1 kg, rated IPX7. The 840D TPU laminated shell is RF welded as a one-piece body and remains flexible after twelve hours at -20 °C, with a sealed zipper welded into the body seam. TPU is specified over PVC for ultraviolet behaviour on cases stored outdoors. An enlarged zip pull is available for cold-weather markets. MOQ 300 pcs, samples in 7–10 days, production in 30–45 days.

Sealock Kayak Canoe Waterproof Rifle Case measures 122 × 30 × 8 cm at approximately 1.1 kg, rated IPX7. At 8 cm thickness the flexible welded body lies flat along a hull floor and fits shallow tank wells and under-gunwale lockers. The 840D TPU laminated shell is RF welded with a sealed zipper welded into the body seam, and welded webbing anchors take a centreline lash or quick-release hardware. This case is not buoyant. MOQ 300 pcs, samples in 7–10 days.