Swamp Hunting Bags are welded waterproof cases for marsh, wetland and flooded-ground hunting. The lead model is the SL-C811 tactical waterproof rifle case: 132 × 33 × 10 cm, approx. 42 L, approx. 2.6 kg, 840D TPU laminated shell with RF welded seams and a full-length two-way waterproof zipper, rated IPX6. Interior: EVA foam at 20–25 mm (lid), 15 mm (base) and 10 mm (sides), plus six to eight adjustable retention straps. Exterior: laser-cut MOLLE, two D-rings, hook-and-loop panel, adjustable backpack straps, detachable shoulder strap and reinforced handle. Colourways: grey, brown, camouflage.
Produced at Sealock's facilities in Dongguan, China and Ho Chi Minh City, Vietnam. MOQ 300 pcs, samples 7–10 days, production 30–45 days.
A swamp hunting bag combines a waterproof shell with the padding and load carriage needed for walking into marsh positions. SL-C811 specifications by area:
| Area | Specification |
|---|---|
| Shell | 840D TPU laminated, RF welded |
| Rating | IPX6 (powerful water jets) |
| Closure | Full-length two-way waterproof zipper |
| Lid foam | EVA egg-crate, 20–25 mm |
| Base foam | EVA, 15 mm |
| Side foam | EVA, 10 mm |
| Retention | 6–8 adjustable straps |
| Exterior | Laser-cut MOLLE, 2 D-rings, hook-and-loop panel |
| Carry | Backpack straps, shoulder strap, handle |
The 132 cm body suits rifles up to roughly 120 cm overall, including scoped precision rifles with a suppressor. 122 cm and 140 cm bodies are also quoted. Retention strap positions are set against a customer reference firearm at sampling.
The MOLLE grid is laser-cut into a welded outer panel, with slot edges sealed during cutting. No webbing is stitched to the shell. The grid is PALS compatible and accepts Tactical Ammo Pouches and utility pouches. Water-jet testing is carried out on finished units with the panel fitted.
IPX6 covers heavy rain, deck wash and hose-down. SL-C811 is not immersion rated. Immersion-rated IPX7 roll-top cases that float are listed under Floating Shotgun Cases.
The full-length zipper opens from either end. Opening from the muzzle end gives access to the barrel section without exposing the full interior.
| Deposit | Location | Cleaning |
|---|---|---|
| Mud | Shell surface | Hose or scrub; no seam tape to lift |
| Fine silt | Zipper track | Fresh-water rinse with slider run back and forth |
| Salt | Hardware and zipper | Fresh-water rinse after tidal use |
| Organic matter | Interior and pockets | Empty and air dry open |
Body length (122, 132 or 140 cm), foam grade and thickness, retention layout, MOLLE panel size and slot pattern, hook-and-loop panel position, reed and marsh camouflage matching, lining colour, welded logo patch and packaging. Lighter unpadded welded cases from Waterproof Floating Hunting Bags can be combined in the same programme.
300 pcs, quoted EXW, FOB or CIF.
Against body length, foam specification, MOLLE layout, colourway, branding and quantity.
Yes, as a welded patch, print, or patch on the hook-and-loop panel.
135 × 38 × 38 cm, 4 pcs per carton, approx. 11.5 kg gross — approx. 570 pcs per 20 GP and 1,390 pcs per 40 HQ.
